[Operation Instruction]
(1) Please power on the controller only after all wiring work is completely finished.
(2) The transistor(TR) will be damaged if a short circuit occurs during work.
[Effect Modes]
(1) RGB Mode - When connected to RGB modules
* You can select and combine multiple desired effects per number (ON)
- Effect 1 : Full Dimming
- Effect 2 : Full Dimming / Full Flashing
- Effect 3 : Random Dimming / Random Flashing
- Effect 4 : Sequential Dimming + Sequential Flashing
- Effect 5 : Cyclic Dimming + Cyclic Flashing
- Effect 6 : Reverse Sequential Dimming + Reverse Sequential Flashing
- Effect 7 : Expanding Dimming + Converging Dimming + Expanding Flashing + Converging Flashing
(2) RGB Single Color Fixed Mode
* Brightness can be adjusted with the speed control switch (only available in RGB single color fixed mode)
- RED, GREEN, BLUE, YELLOW, PINK, SKY BLUE, WHITE
(3) Single Color Mode - When connecting single color modules
- Effect 1 : Overall Dimming
- Effect 2 : Overall Flashing
- Effect 3 : Cyclic Dimming
- Effect 4 : Cyclic Flashing
- Effect 5 : Random Dimming
- Effect 6 : Random Flashing
- Effect 7 : Cyclic Flashing + Random Flashing + Reverse Cyclic Flashing + Expanding Flashing + Converging Flashing
- Effect 8 : Psyche
[Precautions]
(1) Please connect the power only after confirming the producrt connection method and specifications.
(2) Do not disassemble the product.
(3) Always turn off the power when working.
(4) Avoid direct sunlight and install in a well-ventilated area.
(5) When connecting modules, match the output terminals(W,R,G,B) with the module wires, and install within the rated quantity.
(6) Use wires of standard 2.0SQ or above for the controller output terminals.
(7) In RGB mode, up to 150 units per channel terminal can be used in fixed white light mode.
(8) Failure to comply with item 7 may result in overheating and pose a fire hazard.
[NOTE]
Failure to comply with these precautions may result in malfunction, and A/S or exchange will not be possible.
